Provide PDF Format
SAE AMS6412M
- Steel, Bars and Forgings 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337)
- standard by SAE International, 05/17/2010
- Publisher: SAE
$37.00$74.00
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, and forging stock.These products have been used typically for parts, 0.875 inch (22.22 mm) and under in nominal thickness at time of heat treatment, requiring a through-hardening steel capable of developing hardness as high as 50 HRC when properly hardened and tempered, and for parts of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications.
Related Products
SAE AMS5605F
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb..
$37.00 $74.00
SAE J1735_201102
Harmonized Vehicle Headlamp Performance Requirements (Stabilized: Feb 2011)..
$37.00 $74.00
SAE AMS6342J
Steel Bars, Forgings, and Tubing, 0.80Cr - 1.0Ni - 0.25Mo (0.38 - 0.43C) (SAE 9840)..
$37.00 $74.00
SAE J885_201102
Human Tolerance to Impact Conditions as Related to Motor Vehicle Design (Stabilized: Feb 2011)..
$37.00 $74.00