Provide PDF Format
AASHTO TP 70-12
- Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- standard by American Association of State and Highway Transportation Officials, 2012
- Publisher: AASHTO
$25.00$50.00
This test method covers the determination of percent recovery and non-recoverable creep compliance of asphalt binders by means of the Multiple Stress Creep Recovery (MSCR) test. The MSCR test is conducted using the Dynamic Shear Rheometer (DSR) at a specified temperature. It is intended for use with residue from T 240 (Rolling Thin-Film Oven Test (RTFOT)). The test method may also be run on residue from R 28 (Pressurized Aging Vessel (PAV)).
Note 1 - The majority of the development work on this test method was performed on material conditioned according to T 240 (RTFO). The test may be run on unaged binder or on residue from R 28 (Pressure Aging Vessel). However, the performance relationship of results from aging conditions other than T 240 are yet to be developed.
The percent recovery value is intended to provide a means for determining the elastic response and stress dependence of polymer modified and unmodified asphalt binders.
Note 1 - The majority of the development work on this test method was performed on material conditioned according to T 240 (RTFO). The test may be run on unaged binder or on residue from R 28 (Pressure Aging Vessel). However, the performance relationship of results from aging conditions other than T 240 are yet to be developed.
The percent recovery value is intended to provide a means for determining the elastic response and stress dependence of polymer modified and unmodified asphalt binders.
Related Products
AASHTO T 196M/T 196-09
Standard Method of Test for Air Content of Freshly Mixed Concrete by the Volumetric Method (ASTM Des..
$20.00 $40.00
AASHTO R 42-06 (2016)
Standard Practice for Developing a Quality Assurance Plan for Hot-Mix Asphalt (HMA)..
$47.00 $94.00
AASHTO T 185-11
Standard Method of Test for Early Stiffening of Hydraulic Cement (Mortar Method), (ASTM Designation:..
$19.00 $37.00