• ASTM D471-10
Provide PDF Format

Learn More

ASTM D471-10

  • Standard Test Method for Rubber Property-Effect of Liquids
  • standard by ASTM International, 10/01/2010
  • Publisher: ASTM

$30.00$60.00


1.1 This test method covers the required procedures to evaluate the comparative ability of rubber and rubber-like compositions to withstand the effect of liquids. It is designed for testing: (1) specimens of vulcanized rubber cut from standard sheets (see Practice D3182), (2) specimens cut from fabric coated with vulcanized rubber (see Test Methods D751), or (3) finished articles of commerce (see Practice D3183). This test method is not applicable to the testing of cellular rubbers, porous compositions, and compressed sheet packing, except as described in 11.2.2.

1.2 ASTM Oils No. 2 and No. 3, formerly used in this test method as standard test liquids, are no longer commercially available and in 1993 were replaced with IRM 902 and IRM 903, respectively (see Appendix X1 for details).

1.3 ASTM No. 1 Oil, previously used in this test method as a standard test liquid, is no longer commercially available and in 2005 was replaced with IRM 901; refer to Table 1 and Appendix X3 for details.

1.4 ASTM No. 5 Oil was accepted into Specification D5900 as an industry reference material in 2010 and designated as IRM 905. The composition, and properties of this immersion oil were not changed and the data in Table 1 remains current. Refer to Appendix X4 for other details.

Related Products

ASTM D2220-97

ASTM D2220-97

Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75 degrees C Operatio..

$23.00 $46.80

ASTM D2068-10

ASTM D2068-10

Standard Test Method for Determining Filter Blocking Tendency..

$26.00 $52.80

ASTM D3044-94(2006)

ASTM D3044-94(2006)

Standard Test Method for Shear Modulus of Wood-Based Structural Panels..

$23.00 $46.80

ASTM E2484-08(2015)

ASTM E2484-08(2015)

Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices..

$25.00 $50.00